 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Filename: tfs 224a.doc Version 1.9 03.09.2004 VI TELEFILTER Filter specification TFS 224A 1/5 Measurement condition : Ambient temperature TA: Input power level: Terminating impedances at fc * ) : 23 C 0 dBm for input: for output:: 1200 1200 - 5,32 pF - 5,25 pF Characteristics Remark: The reference level for the relative attenuation arel of the TFS 224A is the minimum of the pass band attenuation. This value is defined as the insertion loss ae. The nominal frequency fN is fixed at 224,88 MHz without any tolerance. The values of relative attenuation arel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data Insertion loss (reference level) Nominal frequency Passband Pass band ripple Relative attenuation fN fN fN fN fN 0,75 2,4 8 15 ... fN MHz ... fN MHz ... fN MHz ... fN MHz ... fN 0,3 2,4 8 15 50 arel MHz MHz MHz MHz MHz mean value in PB ae fN typ. value 6,5 0,5 dB fN dB tolerance / limit max. 9 224,88 0,3 1 dB MHz MHz dB max. 40 47 52 765 50 dB dB dB ns ns max. min. min. min. min. 765 1 3 33 40 45 10 - dB dB dB dB dB ns Group delay Group delay ripple within PB Deviation from linear phase fN VSWR within PB Operating temperature range Storage temperature range Frequency inversion temperature Temperature coefficient of frequency 0,675 MHz 1,7 1,5 rms :1 max. max. 3,5 2 rms :1 OTR 25 C ppm/K 2 - 30 C ... + 80 C - 40 C ... + 85 C - TCf ** -0,03 *) The terminating impedances depend on parasites and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. f(Hz) = TCf(ppm/K) x ( T) x fTo(MHz) **) Generated: Checked / Approved: Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 224a.doc Version 1.9 03.09.2004 0 -10 -20 -30 B d n i e d u t i n g a m -40 -50 -60 -70 -80 -90 -100 205.9 209.7 213.5 217.3 221.1 224.9 228.7 232.5 236.3 240.1 243.9 frequency in MHz B d n i e d u t i n g a m 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 1.26 1.2 1.14 1.08 1.02 s 0.96i n y a l 0.9 e d 0.84 0.78 0.72 -10 0.66 224.15 224.3 224.45 224.6 224.75 224.9 225.05 225.2 225.35 225.5 225.65 frequency in MHz (All dimensions in mm) Date code 1 2 3 4 5 6 7 8 9 10 11 12 Input RF Return Ground Ground Ground Ground Output Output RF Return Ground Ground Ground Ground Input Date code: S T U ... Year + week 2004 2005 2006 L1 12 6 L2 C1 C2 1 2, 3, 4, 5, 8, 9, 10, 11 7 tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 224a.doc Version 1.9 03.09.2004 VI TELEFILTER Stability characteristics : Filter specification TFS 224A 3/5 After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 -55 C to 125C / 30 min. each / 10 cycles DIN IEC 68 part 2 - 14 Test N 2. Vibration: 3. Change of temperature 4. Resistance to solder heat (reflow): reflow possible: twice max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 - 3, with exeption of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters peer reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 16,00 0,3 Po : 4,00 0,1 Do : 1,50 +0,1/-0 E : 1,75 0,1 F : 7,50 0,1 G(min) : 0,60 P2 : 2,00 0,1 P1 : 8,00 0,1 D1(min) : 1,50 Ao : 5,50 0,1 Bo : 7,50 0,1 Ct : 13,5 0,1 P1 t Do PIN Marker Po P2 Ko Date Code Typ D1 Ao W2 Reel (all dimensions in mm) A : 330 W1 : 16,4 +2/-0 W2(max) : 22,4 N(min) : 50 C : 13,0 +0,5/-0,2 A C N W1 The minimum bending radius is 45 mm. Air reflow temperature conditions Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 224a.doc Version 1.9 03.09.2004 VI TELEFILTER Filter specification TFS 224A 4/5 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods main-heating periods 150 C - 170 C over 200 C 60 sec. - 90 sec. 20 sec. - 25 sec. peak temperature 255 C 5 C Chip-mount air reflow profile 260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / s ec. 140 160 180 200 220 240 Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 224a.doc Version 1.9 03.09.2004 VI TELEFILTER Filter specification TFS 224A 5/5 History Version 1.1...1.5 1.6 Reason of changes - generate filter specification of TFS 224A. - change limit values of group delay ( mean value in pass band ) from 763 10 ns to 765 10 ns according to customer requirement. - change marking. - correct termination impedance. Name Dunzow W. Date 11.02.2000. Dunzow W. Dunzow W. 12.09.2000. 29.10.2002. 1.7 1.8 - labelling changed - filter characteristic added - change remark - remove centre frequency - labelling corrected Pfeiffer 16.08.2004 1.9 Steiner 03.09.2004 Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. |
Price & Availability of TFS224A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |